Skip to main content
Adding a Test Report
Updated over 9 months ago

Adding a Test Report:

To add a Test Report first navigate to the “Test Report” tab from the Dashboard and select the “New Test Report” button. NOTE: Each jurisdiction may have different details and requirements for their test reports not reflected in this example.

Search By Location:

You will be prompted to select the location the test report is for. When searching for a location there has to be at least one character present in the Location Address section. The Location Name is not required but can help refine a location search. Once you click search a list of location options will appear, select the one you are creating a test report for.

Screen_Shot_2022-08-22_at_12.58.46_PM.png

If you are entering a test report for a new location there is the option to create a new location. Under the location, name click on I'm at a brand new location. You will be prompted to select a Service Provider, a Tester, and a Test Kit before you are taken to the test report page.

Screen_Shot_2022-08-22_at_12.57.57_PM.png

Once you have selected your location you will be prompted to select an Assembly, Service Provider, Tester, and test kit before you are taken to the test report page.

Search By Serial Number:

If you already have the device serial number you may use the search by serial number option. A matching serial number is needed to pull up the correct device for test submission.

Screen_Shot_2021-09-09_at_4.16.33_PM.png
Screen_Shot_2021-09-09_at_4.13.30_PM.png

On the test report page, you will be taken through a series of questions to fill out the test report as accurately as possible Including the location address, the assembly, the Service Provider, and Tester.

When finished you can choose either Save or Save and Submit. If you choose to save, the Test Report will remain In Progress until it is completed. If you choose Save and Submit the report will be submitted and you will be brought to the Test Report details page, where the report can either be Accepted, Rejected or Send Back.

Adding Attachments:

To include an attachment to your test report form select the small paper clip icon in the upper right-hand corner of the screen.

The system will ask you to attach the image to a specific field within the test report:

Did this answer your question?