Who this article is for: Authority users who manage sample reports, inspections, and submittals.
Overview
Sometimes a required report is never going to come in. The sampling window has passed, the inspection didn't happen, or the submittal was never delivered. Not Submitted closes that report out. You don't have to leave it open forever or submit it empty.
When you mark a report Not Submitted:
Its status changes to Not Submitted, and it becomes read-only.
SwiftComply creates one Missed Report nonconformance for it.
Any Late Reporting nonconformance on the report is voided.
Not Submitted works on sample reports, inspections, and submittals. It's a final status, the same as Submitted for sample reports and Completed for inspections and submittals.
đĄ Late Reporting or Not Submitted? Late Reporting means a report is overdue but may still arrive. Not Submitted means you've decided it won't.
Before you begin
The report must be Scheduled or Past Due, and not archived.
An inspection needs a due date. A Draft inspection (one started with New Inspection) can't be marked Not Submitted.
For a sample report assigned to Industry, its permit must already be in effect.
You need permission to edit that kind of report.
Marking a report Not Submitted
Open the report. Where the Not Submitted button sits depends on the report type:
Sample report: in the header of the summary card, next to the print button.
Inspection: in the header of the inspection form (where clicking a Scheduled or Past Due inspection takes you), and on its overview page.
Submittal: in the header of the summary card, next to Delete and Complete Submittal.
Click Not Submitted. The Enter as Not Submitted window opens. It reads: "Entering this sample report as "Not Submitted" will make it read-only, create one Missed Report nonconformance and void any Late Reporting nonconformances." (For an inspection or submittal, it names that report type instead.)
Type your name in Type Your Name.
Check the Date and Hour. They show the current date and time in your organization's time zone. You can't change them. SwiftComply records the time when you confirm.
Click Enter Not Submitted. The button stays unavailable until you type a name.
Cancel closes the window without changing anything.
Where your name is recorded:
Sample reports: Submitted By shows the name you typed, and Submitted On shows when you marked it.
Inspections: the name you typed is recorded as Inspector Name(s).
Submittals: Submitted By shows the name you typed, and Submitted On shows when you marked it.
The report's Activity tab records Report Marked Not Submitted.
What changes on the report
A Not Submitted report is read-only for good.
Sample reports: data entry is locked. Sign and Submit and Not Submitted no longer appear, and Retract Report isn't offered. The Chain of Custody tab is read-only. Archive is available.
Inspections: Edit no longer appears, and attachments are read-only. The Inspection Report PDF section isn't shown. Archive is available.
Submittals: Delete, Not Submitted, and Complete Submittal no longer appear. Archive is available.
Not Submitted inspections and submittals can't be deleted. Archive them instead.
â ď¸ Draft findings on an inspection are deleted. If you recorded nonconformances on the inspection form but never completed the inspection, those draft findings are removed when you mark it Not Submitted. Only the Missed Report exception remains.
The Missed Report nonconformance
Marking a report Not Submitted creates exactly one nonconformance, however many analytes or requirements the report has.
Field | Value |
Classification | Missed Report |
Type | Sample reports: Violation when the report is assigned to Industry, Exception when it's assigned to Authority. Submittals: always Violation. Inspections: always Exception. |
Date/Time | The report's due date. If you mark the report before its due date, it's the date and time you marked it. |
Status | Open |
It appears on the report's Enforcement tab and on the Violations page, and it follows the same lifecycle as any other violation or exception.
A Missed Report violation is an open violation, so it makes the location Non-Compliant until it's closed. A Missed Report exception doesn't affect compliance status.
đĄ Missed Report is system-managed. It isn't in the Classification list when you add a nonconformance by hand. Marking a report Not Submitted is the only way to create one.
What happens to Late Reporting
When a report passes its due date, SwiftComply raises a Late Reporting nonconformance on it. If you then mark the report Not Submitted, that Late Reporting nonconformance is voided automatically, and the Missed Report nonconformance replaces it. The location ends up with one finding for the missed report, not two.
A voided Late Reporting nonconformance drops off the nonconformance lists. It no longer counts toward the location's compliance status. Because the report is no longer due, SwiftComply doesn't raise a new Late Reporting nonconformance for it.
Reports required by an enforcement response
A response can require sample reports, inspections, or submittals.
Not Submitted counts as final, the same as Submitted or Completed:
When every report a requirement generated is final, the requirement is met.
When every requirement on the response is met, the response completes.
The violations the response addresses then close through the normal lifecycle.
â ď¸ The Missed Report is a new, separate finding. The response doesn't address it, so it stays open after the response completes. If it's a violation, the location can stay Non-Compliant because of it. You can respond to it like any other violation.
Recurring schedules
Marking one report Not Submitted affects only that report. The other reports in the same schedule, including the next one, keep their status and due dates.
FAQ
Q: Why don't I see the Not Submitted button?
A: The report must be Scheduled or Past Due and not archived. It isn't offered on Submitted, Completed, or Not Submitted reports, or on a Draft inspection.
Q: Can Industrial Users mark a report Not Submitted?
A: No. Only authority users can. The portal never shows the button, and SwiftComply refuses the action from a portal account. Industrial Users can see the Not Submitted status on their sample reports and submittals, and can open those reports read-only.
Q: Can I undo Not Submitted?
A: No. A Not Submitted report can't be edited, submitted, completed, or retracted, and there's no action to change it back to Scheduled or Past Due. Check the report before you confirm.
Q: Why can't I mark a sample report on a new permit?
A: The permit hasn't taken effect yet. You can mark its reports once it's in effect.
Q: Why isn't the Missed Report dated on the report's due date?
A: You marked the report before it was due. The Missed Report takes the earlier of the due date and the time you marked it.
Q: Why is my location still Non-Compliant after the response completed?
A: Any open violation keeps a location Non-Compliant, and the response didn't address the Missed Report violation on the Not Submitted report. Respond to it or close it through the normal violation lifecycle.
Q: Where did my draft inspection findings go?
A: They were deleted when you marked the inspection Not Submitted. Draft findings are only kept on inspections that are completed.
Q: Can I mark several reports at once?
A: No. You mark reports one at a time from each report's page.



