Skip to main content

Setting Up and Printing Postcard Notices

How to send compliance notices as postcards: when they fit, setting up the type and template, designing the card, printing and mailing.

Who this article is for: Authority users


Who this article is for: Org/City Users

Overview

SwiftComply can send automated compliance notices as postcards instead of letters. A postcard needs no envelope, no folding and no stuffing: you print the cards, tear them apart along the perforations and mail them.

Letter

Postcard

Postage (USPS)

First-class letter price

Postcard price, which is lower than the letter price (check current prices on usps.com)

Paper and envelope

Paper plus an envelope for every notice

Perforated card stock, 4 postcards per sheet, no envelope

Prep time

Fold, stuff and seal each notice

Print and tear apart

This article covers when postcards fit, how to set up a postcard Communication Type and Template, how to design the card, and how to print and mail it.

When Postcards Work Best

Postcards work for any kind of location. What matters is what you put on the card and how much room it needs.

We recommend keeping failed test, final and shutoff notices as letters. They're more serious, they can include details that shouldn't be on an open card, and your ordinance may require a specific way of sending them.

Postcards that list assemblies

The {{ASSEMBLY_DATA_WITH_NOTES}} merge field adds a table of the assemblies on the notice: type, manufacturer, size, model, serial number and test due date, with each assembly's Assembly Location text on a row under it.

A postcard is a fixed size, and anything that doesn't fit is cut off with no warning, so those assemblies just don't print. Each assembly and its Assembly Location take up space, so a card holds only a few assemblies, fewer when the Assembly Location text is long.

The merge fields that give each assembly its own table, like {{ASSEMBLY_DATA_SEPARATED}} and {{ASSEMBLY_TEST_DATA}}, take even more room. They're meant for letters and emails, so use {{ASSEMBLY_DATA_WITH_NOTES}} on a postcard.

  • Residential locations usually have one or two assemblies, so the table usually fits.

  • Commercial locations often have more assemblies, which may not fit.

If the card lists assemblies, check Disable Assembly Grouping on the template, so every postcard lists one assembly (a location with three assemblies due gets three postcards). With grouping on, one postcard covers every assembly at that location that's due in that run, and any that don't fit are left off with no warning.

Postcards that don't list assemblies

Without the assembly table, there's no space problem, and postcards work for commercial locations too. A survey notice is one example: a survey is for one location, so the card can just say the location is due for a survey. There's room for text, a logo, a QR code and contact information.

Before you begin

  • You need permission to create and edit Communication Types and Templates.

  • A location field to target on. To send postcards to some locations and letters to others, you need a location custom field that tells them apart, such as one with Residential and Commercial values. Its name depends on how your organization was set up. It appears in the template's Targeting list (checkbox and date fields don't).

  • A location with that field blank won't match a value like Residential. It only gets the notice if the same type also has a template with no targeting (see "How Templates in a Type Work Together" below).

  • A template targets one value per field, and a location has to match every value on the template. If residential shows up as more than one value (like Residential and Single Family), make a postcard template for each value.

  • By default, testers can create a new location when they submit a test report. Check locations created this way and fill in the field.

  • A printer that prints two-sided on the card stock you choose. No special equipment is needed.

  • Perforated postcard sheets. The postcard layout is built for Avery 8387 (for inkjet printers): letter-size sheets with 4 perforated postcards, each 4.25 x 5.5 inches. Avery 5689 is the same layout for laser printers, and any perforated sheet with the same layout should work. Pick card stock that's thin enough to feed through your printer and between 0.007 and 0.016 inch thick, which USPS requires for the postcard price. Before ordering in bulk, try a few options in your printer.

  • A QR code image (optional). A postcard doesn't have much room, so a QR code can link to a page on your website with everything else: how to find a tester, local ordinances, FAQs and contact details. You can change that page at any time without reprinting cards. Use a QR code that links straight to your page (some free generators route it through their own link, which can stop working later). Save it as a PNG or JPG; those are the only image types the editor can upload. Print the web address next to the code for people who can't scan it, and test the printed card with a couple of phones.

How Templates in a Type Work Together

A postcard needs a Communication Type and a Communication Template. The type decides what triggers the notice, such as an assembly test coming due. The template decides when it goes out, who gets it, how it's sent and what it says.

A type can have more than one published template, as long as each one has different targeting.

  • Give every template in the type the same Period. Then the templates with targeting go first, a template with no targeting picks up everyone left, and each assembly gets the notice once.

  • If the Periods are different, the template with the longer Period goes first, even without targeting, and an assembly can end up getting the notice from both.

  • Publishing a template unpublishes any other published template in the same type with exactly the same targeting.

You can set postcards up in one of two ways:

  • In the same type as your letter (recommended). Add the postcard template to the existing notice type with targeting (such as Residential) and the same Period as the letter template, and leave the letter template with no targeting. Postcards go to the locations that match, and letters go to everyone else, including locations with the field blank.

  • In a type of its own. Each type generates on its own, so an assembly can get a notice from both types. To prevent that, the letter template needs targeting too: clone it, add targeting (such as Commercial), publish the copy, and unpublish the old letter template. With this setup, a location with the field blank matches neither template and gets no notice. The first run of a new type also picks up every assembly already in its window, including ones that just got the letter, so check Unsent Communications before you print that first batch.

Picking or Creating the Communication Type

Skip this section if you're adding the postcard to a type you already have.

  1. Click Communications in the left navigation.

  2. Click Create Type.

  3. Fill in the form:

  • Type Label: a clear name, such as "First Notice"

  • Source: Assembly

  • Trigger Type: Compliance expiration

  • Trigger Info: Assembly test

  1. Click Save.

This tells SwiftComply to look at assembly test due dates. The template sets how far ahead of the due date the notice goes out.

The Communications page with the Create Template, Create Type and Downloads buttons
The New Communication Type form for a postcard type

Creating the Postcard Template

  1. On the Communications page, click Create Template.

  2. Fill in the form:

  • Type: the type you picked or created.

  • Communication Name: a clear name, such as "First Notice - Postcard".

  • Period: how far before the due date the notice generates, such as 30 / Days / Before. If an assembly is due March 31, its notice generates March 1. The first run after you publish picks up every assembly already due within that window, not only those exactly 30 days out. If the type already has a letter template, use the same Period.

  • Date Format: how dates print on the card.

  • Contact Methods: Postcard. Pick Postcard before you design the card, since the editor only switches to postcard size once Postcard is picked. Contact Methods can't be added after the template is published, and Letter and Postcard can't both be picked.

  • Contact Types: Mailing, or whatever the letter template for this notice uses, so the same people get it. Use Primary Contact sends only to the location's primary contact, whatever their contact type. If the location has no primary contact, it goes to every contact with the Contact Types you picked.

  • Disable Assembly Grouping: checked sends a separate postcard for each assembly. Unchecked (the default) puts every assembly due at that location in that run on one postcard. The form recommends checking it for postcards.

  1. Click Save.

Who gets a postcard:

  • With Postcard as the only Contact Method, every contact the template picks gets a postcard. If a contact's address is missing or incomplete, their postcard goes to the location's address.

  • If the location has no contact with the Contact Types you picked, the postcard goes to the location itself, addressed to the location name.

To email the people who have an email address on file and mail everyone else a postcard, list Email first, then Postcard, and check Use Only First Available Method. With that box checked and Postcard listed first, email never sends. Without that box checked, contacts with an email get both. Emails don't go out on their own: send them from Downloads with Communication Method set to Email, then click Send Emails.

The New Communication form with Type, Communication Name, Period and Date Format
Targeting, Contact Types and Contact Methods set to Postcard

Setting Up Targeting

Targeting limits the template to the locations you want.

  1. Pick your location field in the Targeting list.

  2. Type the value, such as Residential, in Targeting Value. Use the complete value: "Res" won't match "Residential". Upper and lower case don't matter.

  3. Click +. The value appears in the list below.

To match everything except one value, put an exclamation point before it. For example, !Commercial matches Residential, Industrial and any other value except Commercial. It doesn't catch blanks: a location with nothing ever saved in that field doesn't match any value on it, "!" values included. To cover those locations, use a template with no targeting in the same type.

Designing the Postcard

This takes the most time. Plan on at least an hour or two for your first postcard. You only build it once.

  1. With the template in edit mode, click Edit Communication Text. You can only change the text while the template is a draft.

  2. Build the message side of the card (see below).

  3. Click save in the editor. This keeps your text on the form; it isn't saved to the template yet.

  4. Click Save on the template.

  5. Leave edit mode and click Preview Communication Text to see the card.

The postcard editor with merge fields on the message side

Message side (you design it)

This is the side the recipient reads. You build it from:

  • your notice text

  • your logo

  • a QR code image

  • contact information, such as a phone number and email address

  • merge fields, such as {{ASSEMBLY_DATA_WITH_NOTES}} for the assembly table

Merge fields are replaced with real data when the notice generates. Useful ones for postcards:

  • {{GENERATED_ON}}: the date the notice was generated

  • {{DUE_BY}}: the due date on the notice

  • {{LOCATION_ADDRESS}}: the location's address, so an owner with more than one property knows which one it's about

  • {{ACCOUNT_NUMBER}}: the location's account number. Anyone who handles the mail can read a postcard, so check your organization's policy before printing account numbers on one. {{LOCATION_ADDRESS}} also shows which property the card is about.

  • {{ASSEMBLY_DATA_WITH_NOTES}}: the assembly table described above. This lets a postcard stand on its own without a letter.

The full list of merge fields is in Building & Editing a Communication Type and Template.

Preview Communication Text lays the card out on a letter-size sheet the way it prints, in the top-left corner, and fills it with made-up sample data. Preview shows the last saved version of the template.

A preview of the message side with sample data

Address side (generated for you)

SwiftComply generates the address side, and it can't be edited. It has:

  • your organization's name and address as the return address

  • the recipient's name and mailing address

In the preview, the address side is on the second page, in the bottom-left corner. That's the back of the same card when you print two-sided with Flip on long edge. The preview uses a made-up return address and recipient.

A preview of the address side with sample data

Tips for the editor

  • Change one thing at a time. Larger changes can shift the layout, so an image might cover text or push it off the card.

  • Save and preview after every change.

  • Test print early. The printed card keeps a quarter-inch margin on every side, so it won't match the editor exactly. To check a real postcard once they've generated, open one in Unsent Communications and click Download.

  • Size images by trial and error. Resize the logo or QR code in the editor, then print to check. A QR code needs to be large enough to scan.

  • Choose between images and text. Without images there's a lot of room for text.

  • Keep it easy to read. Use dark text on a light background, keep the text around 10 point or larger, and put the due date and what to do near the top.

Publishing the Template

Only published templates generate. Click Publish when the template is ready.

To change a published postcard, click Clone, edit the copy and publish it. Keep the copy's type and targeting the same, so publishing it unpublishes the old one and nobody gets the notice twice.

Repeat these steps for each notice you want as a postcard, such as a first and second notice.

The saved template with the Publish and Clone buttons

Printing the Postcards

Important: Pick Flip on long edge in your printer's two-sided settings. Otherwise each message side won't line up with the right address side, so account numbers won't match addresses. Check it before every print run.

  1. Go to Communications and click Downloads.

  2. Pick the Communication Type, set Communication Method to Postcard, check Unsent, and click Get List, then Request Downloads. If the type also has a letter template, the letters are a separate download with Communication Method set to Letter.

  3. When the download request is ready, open it and click Download. You get a zip file with the PDF inside. Large runs can be split into more than one download request. Downloads are only available for a limited time; if one expires, you can remove it and request it again.

  4. Load the postcard sheets in the printer.

  5. Set the printer to two-sided, pick Flip on long edge, and print at actual size (100%), not fit to page.

  6. Print one sheet first and check that both sides of each card are for the same location, then print the rest. The PDF alternates a page of message sides with a page of address sides.

  7. Tear along the perforations to separate the four postcards on each sheet.

  8. Back on the download request, click Mark Downloaded, then Update Comms to Sent, then Mark Completed. Until you do, the postcards don't show as sent in SwiftComply, and you can't request the same download again. The Download button goes away once you click Update Comms to Sent, so print first.

A postcard keeps the location, contact and assembly details from when it generated. If you fix an address after that, open the postcard in Unsent Communications and click Rebuild Info before you request the download.

The Downloads form with Communication Type, Communication Method and Unsent
A Communications Download Request with the Download and Mark Downloaded buttons

On the address page, the top and bottom rows are swapped compared with the message page, so the address for the top-left card is in the bottom-left corner. That's on purpose: when you print two-sided with Flip on long edge, each address lands on the back of the right card.

A printed sheet of four postcards, message side
A printed sheet of four postcards, address side

Mailing the Postcards

Postcards go at the USPS postcard price, which is lower than the letter price (check current prices on usps.com). A 4.25 x 5.5 inch card on stock between 0.007 and 0.016 inch thick qualifies.

  • Put the stamp or meter imprint in the upper right corner of the address side.

  • If you use a postage meter, set it to the postcard price, or you'll pay the letter price.

  • Returned postcards go to the return address, which is your organization's address under Settings › Organization Info. Make sure that's where your team handles returned mail; if it needs to change, contact SwiftComply support. Then fix the address in SwiftComply and send that notice again.

What happens next

  • Each time generation runs, the published template creates postcards for the assemblies that come due within its Period and match its targeting. They wait in Unsent Communications until you download and print them.

  • After you click Update Comms to Sent, the postcards show as Sent. Postcards have no delivery tracking, so they never show as Delivered. See Tracking Communication Status.

Example notice plan

Here's one way an organization can combine postcards with other notices:

Notice

How it goes out

Format

When

First Notice

Automatic

Postcard (residential) / Letter (commercial)

Before compliance expiration

Second Notice

Automatic

Postcard (residential) / Letter (commercial)

Closer to or at compliance expiration

Third / Final Notice

Sent by hand

Door hanger

30+ days overdue

Failure Notice

Sent by hand, or automatically as a letter using a type with Trigger Type Failed Test

Letter

After a failed test

Quick reference checklist

  • The location field you target on is filled in for the locations that should get postcards

  • Communication Type picked or created (Assembly, Compliance expiration, Assembly test)

  • Postcard template created with Contact Methods set to Postcard, targeting (such as Residential), and the same Period as the letter template in the type

  • Disable Assembly Grouping checked if the card lists assemblies

  • Letters still cover everyone else, so no location gets both or neither

  • Message side designed (text, logo, QR code with the web address printed next to it)

  • Test prints done to check layout, image sizing and front/back alignment

  • Perforated postcard sheets (Avery 8387 for inkjet or 5689 for laser) bought and tested in your printer

  • Printer set to two-sided, Flip on long edge, actual size

  • Return address under Settings › Organization Info is where returned mail should go

  • Template published

  • If the card lists assemblies, one real postcard downloaded to check the table fits

  • After each run: Mark Downloaded, Update Comms to Sent, Mark Completed

FAQ

Why are some assemblies missing from my postcard?

The card is a fixed size and cuts off anything that doesn't fit, including rows of the assembly table. Check Disable Assembly Grouping so each postcard lists one assembly.

Why did a location get no notice at all?

If every template in the type has targeting, a location with nothing saved in the targeting field matches none of them. Add a template with no targeting to the same type, or fill in the field on that location.

Why did an assembly get both a letter and a postcard?

Either the two templates are in different types, or they're in the same type with different Periods. Put them in the same type with the same Period.

Why did a contact get both an email and a postcard?

All listed Contact Methods generate unless Use Only First Available Method is checked. Check it, and list Email before Postcard.

Why can't I request a download again?

A matching download request is still open. Finish it with Mark Downloaded, Update Comms to Sent and Mark Completed, or remove it if it expired.

I fixed an address but the postcard still shows the old one.

Postcards keep the details from when they generated. Open the postcard in Unsent Communications and click Rebuild Info, then request the download again.

The fronts and backs don't line up. What's wrong?

Your printer is probably set to flip on the short edge, or to fit to page. Pick Flip on long edge, print at actual size, and print again.

Can I change the address side?

No. SwiftComply generates the address side, and it can't be edited.

Why don't my real locations show in the preview?

Preview Communication Text always uses made-up sample data. To see a real postcard, open one in Unsent Communications and click Download.

Related articles

Did this answer your question?