In this article:
Entering a Pump Out:
When entering pump outs you will now be required to select a grease control device from the establishments list of grease control devices (GCDs). The pump out form will prompt you to select from the establishment's existing GCDs. If a GCD is not selected the system will not allow the pump out to be submitted.
The dropdown list of GCDs will display the type, and capacity of each GCD. If there is only one GCD attached to an establishment the pump out form will default to that GCD. If an establishment has multiple GCDs one must be selected from the dropdown, the system will not default to a specific GCD.
Food service establishments, and service providers will also see the type and capacity of every available GCD.
Establishments with no listed GCD have been pre-populated with a default 0 gallon GCD. The system will default to that 0 gallon GCD when entering a pump out. The default GCDs will all be created with the following specifics:
Name: Same as Establishment
Capacity: 0 Gallons
Here is the view that food service establishments will see when entering pump outs:
Sorting for Default GCDs
The goal of including default GCDs was to allow city regulators to search among these default devices and update the information as inspections begin taking place in person once again.
To create a list of the default GCDs that were created in the system navigate to the Establishments tab and select Grease Control Devices.
Once viewing the list of grease control devices click the Category search box, and select default from the drop down menu. Hit Apply to generate the full list of system generated default GCDs.